How to Paint with Viking Linseed Oil Paint.

Application Suggestions for Viking Linseed Oil Paint :

Formulated for exterior surfaces only.

• Ensure the surface is clean and dry before application.

• Apply in 60°F or warmer environment.

• Mix paint very well before each use.

  This paint has real earth pigment that settles at the bottom. Mixing by hand can take time so it is recommended to mix with an electric stick blender (found in kitchen supply store) or with a paint mixing drill attachment.

  
  

  Here is a helpful video demonstrating How to Mix Viking Linseed Oil Paint.

• Think twice about storing your paint in a cold location. Before application, ensure the paint is at least room temperature so it is easy to brush or wipe on.

  It is possible to warm carefully in double boiler or set on radiator and apply warm to your wood surface. Do not boil – do not microwave.

• No primer is needed. Apply 2-3 relatively thin, even coats with a stiff bristle brush, clean cotton rag, or microfiber cloth.

  
  

• Let dry completely (fully dry to the touch) between coats, typically 48 hrs.

  The first coat can appear patchy as paint soaks into drier areas on a wood surface. The second coat will even out the painted surface. A third coat is recommended for ideal surface protection.

• If painting inside, ensure there is good air circulation. Cold temperatures will slow dry time.

Future Maintenance:

• Clean the surface with Linseed Oil Soap or non-petrochemical liquid soap if needed to remove dirt or air-pollution build-up.

  
  

• Rinse well and let dry fully. Do not power wash as this will introduce too much moisture into a porous wood surface.

  
  

• Apply a coat of Viking Purified Raw Linseed Oil to nourish dry surface and return the original luster of the natural pigment or apply a relatively thin, even maintenance coat of paint.

  
  
  
  

  For questions, please contact info@earthandflax.com or check out our Earth + Flax video library.