Authentic Pine Tar, often referred to as Stockholm tar is a pure, natural wood preservative manufactured in Sweden. Pine tar was used on viking ships and ancient Scandinavian churches that still stand today. It was and still is, prized for its ability to create a water repellent vapor barrier on wood and rope, as well as for its antiseptic and insect repelling properties.
Black Pine Tar is a very traditional Swedish surface treatment for wooden buildings and boats. It is currently the most trendy of the pine tar options as it has been featured in many recent design blogs and magazines for both new and old construction.
Provides fantastic UV protection for wood in damp, humid climates, as well as dry locations or direct sunlight. Applications include, fence posts, fencing, decks, siding, shingles, split roofs, boat hulls, raised garden beds, etc.
It is suggested to thin with Viking Purified Raw Linseed Oil - no solvents needed! Mix 50/50 and apply warm as it will soak deep into the wood for superior, long-lasting results.
Not recommended for interior applications as it does have a unique scent.
Do not apply on skin.
Authentic Black Pine Tar
Application Instructions for Authentic (Light, Dark, Black, Red, and Green) Pine Tar:
- Ensure wood surface is clean and dry. Pine Tar is only appropriate for bare wood surfaces. If previous coating exists, it must be scrubbed off using a nonpetrochemical cleaner/detergent or removed, preferably with infrared heat. Do not use chemical strippers on a porous wood surface.
- For roughcut, kiln-dried, and other very dry timber apply Viking Purified Raw Linseed Oil for exceptional moisture protection and to extend Pine Tar coverage. See Viking Purified Oil Application Steps for best practices.
- Mix Authentic Pine Tar with Viking Purified Linseed Oil. No solvents are needed! 50/50 mixture is suggested but ratio can be changed based on personal preference to achieve a darker or lighter finish. Suggested to do a test first to determine preference.
- Apply in 60°F or warmer environment. Warmer temperatures speed dry time.
If Pine Tar and Purified Oil are cold both will be thick or appear syrupy. Ensure materials are at least room temp before application (aka think twice about storing in cold location) so it is easy to brush or wipe on. It is possible to warm carefully if workshop is cold in double boiler or set on radiator and apply warm to wood surface (not hot – do not boil – do not microwave).
- Apply Pine Tar mixture, typically 2 thin coats with stiff bristle brush, rag, or microfiber cloth. Not suggested to spray Pine Tar.
- Brush out as needed to avoid drip marks. Let dry. Dry time is typically within 2448 hrs in warm temperatures and may take longer based on various climates and/or wood type. Will take a week or two to fully cure.
Do not use conventional boiled or raw linseed oil that is not purified as it may not dry, can go rancid, and has unnecessary solvent additives.
For questions, please contact email@example.com.