Pine Tar Oil is an oil rich, 100% petrochemical free formulation.

Pre-mixed and ready to use, it is a combination of 15% Authentic Dark Pine Tar and 85% Viking Purified Raw Linseed Oil, creating a natural, light, translucent finish on smooth and rough cut exterior timber.

Authentic Dark Pine Tar, often referred to as Stockholm tar is a pure, natural wood preservative manufactured in Sweden. Pine tar was used on viking ships and ancient Scandinavian churches that still stand today. It was and still is, prized for its ability to create a water repellent surface on wood and rope, as well as for its antiseptic and insect repelling properties.

Dark Pine Tar is 100% petrochemical-free and the most traditional of the pine tar options. It is an excellent substitute for pressure treated wood and even preserves wood in contact with soil.

The Pine Tar Oil is so light that it does not offer much UV protection in comparison to a higher ratio of Dark Pine Tar or the Pigmented Pine Tar options. It impacts the natural color of the wood less but expect more natural weathering and aging over time.

Applications include, fence posts, fencing, decks, siding, siding shingles, roof shingles, boat hulls, raised garden beds, outdoor furniture, etc.

Approximate coverage is 500-600 sq ft per gallon.

Apply thin, even coats. 2 coats miniumum is recommended.

Not recommended for interior applications as it does have a unique campfire scent. Aroma will dissipate within 1-2 weeks.

Do not apply on skin.

Pine Tar Oil Exterior Wood Preservative: 1 Gallon

Name: Pine Tar Oil Exterior Wood Preservative: 1 Gallon
SKU: 94600

SKU: 94600

$79.00

Quantity

Application Instructions for Pine Tar Oil :

Ensure wood surface is clean and dry before application. Pine Tar is only appropriate for bare wood surfaces or over a previously applied Pine Tar finish.

If a previous barrier-forming coating exists, it must be scrubbed off using a petrochemical free liquid soap/cleaner or fully removed, preferably with an infrared tool.

Do not use chemical strippers on a porous wood surface. Avoid power washing.

For roughcut, kiln-dried, or other very dry timber apply an initial “primer” coat of Viking Purified Raw Linseed Oil for additional moisture protection and to extend Pine Tar coverage. (optional)

Apply in 60°F or warmer environment. Warmer temperatures speed dry time.

If the Pine Tar Oil is cold, it will be thick or appear syrupy. Ensure materials are at least room temp before application (aka think twice about storing in cold location) so it is easy to brush or wipe on. It is possible to warm carefully if workshop is cold in double boiler or set on radiator (80-90 degrees max) and apply warm to wood surface

(not hot – do not boil – do not microwave).

Apply thin, even coats of Pine Tar mixture with a stiff bristle brush or clean cloth. Ensure each coat is fully dry before applying the next. Two coats minimum is recommended.

Not suggested to spray Pine Tar Oil.

Brush out as needed to avoid drip marks. Let dry. Dry time is typically within 72 hrs in 60+ degree temperatures and may take longer based on various climates and/or wood type.

For some timber or when ambient temps are cooler, it may be helpful to apply the Pine Tar mixture, let soak in, and wipe off any excess sitting on the surface before end of day to avoid unevenness. (optional)

Do not use conventional boiled or raw linseed oil that is not purified as it may not dry, can go rancid, and has unnecessary solvent additives.

For questions, please contact info@earthandflax.com.
Maintain as needed when the wood begins to appear very dry. Manufacturer recommends maintenance every 8-10 years.

Gently clean surfaces with Linseed Oil Soap or a non petrochemical liquid soap, remove any dirt or organic growth with a soft deck brush, rinse well, and let dry completely.

Apply 1-2 thin, even coat of Pine Tar Oil.

Application should be done in 60+ degree or warmer temperatures.

EARTH+FLAX

Pine Tar Oil Exterior Wood Preservative: 1 Gallon

Application Suggestions

Coverage

Maintenance